Characteristic :

【New Upgrade】 It is equipped with 4-in-1 nanometer lamp beads to meet the needs of brighter and wider area lighting. This solar lamp uses white light and can illuminate an area of ​​30 square meters.

【Adjustable Brightness and Duration】 Our outdoor solar light is controlled by a remote. It is dimmable. Lighting timer modes: (1) Automatic on/off, from dusk to dawn, all-night lighting; (2) 3/5/8-hour countdown timer. You can make adjustments according to the situation and the weather.

【Long Working Time】 The solar spotlight with remote control is equipped with high-quality solar panels to charge the built-in high-capacity lithium-ion battery, which can provide 8 to 10 hours of continuous lighting after a full day of charging.

【Waterproof and Durable】 The solar light has an IP67 outdoor waterproof rating and can be used normally in the rain. This outdoor solar spotlight is made of aluminum metal.

The package includes:

1 * solar lamp 72LED/128LED/200LED (optional)

1 * remote control

4 * screws

2 * batteries

1 * device

Specification :

Parameter 72LED:

Protection class: IP67

Solar panel material: PVC

Battery capacity: 1000 mAh

Battery: lithium battery

Charging time: 6 to 8 hours

Working hours: 8 to 10 hours

Synchronization function: 3/5/8 hours

Number of lamp beads: 72

Lamp size: 12 cm * 13 cm

Solar panel size: 15 cm x 13 cm.

Control method: remote control

Parameter 128LED:

Protection class: IP67

Solar panel material: PVC

Battery capacity: 1200 mAh

Battery: lithium battery

Charging time: 6 to 8 hours

Working hours: 8 to 10 hours

Synchronization function: 3/5/8 hours

Number of lamp beads: 128

Lamp size: 15 cm * 19 cm

Solar panel size: 22 cm * 13.5 cm

Control method: remote control

Parameter 200LED:

Protection class: IP67

Solar panel material: Aluminum

Battery capacity: 3600 mAh

Battery: lithium battery

Charging time: 6 to 8 hours

Working hours: 8 to 10 hours

Synchronization function: 3/5/8 hours

Number of lamp beads: 128

Lamp size: 18 cm * 24 cm

Solar panel size: 18 cm * 27 cm

Control method: remote control

If the lamp does not turn on after receiving the solar-powered product for the first time, please follow the following steps
1. Please turn on the product switch first
2. Place the solar panel in a location with sufficient sunlight and charge for more than 8 hours.
3. Keep the switch on and place the light fixture in a dark environment

Note : To verify the test method, first connect the power cord between the lamp body and the solar panel. Place the solar panel with the black side facing up and towards the sun. You should see the red charging indicator next to the LED bead flashing continuously, indicating that charging is normal. Place the solar panel facing down and away from sunlight, and the LED beads will automatically light up, indicating that the control is normal and it can be installed as usual. The solar projection lamp has undergone charge and discharge testing and inspection at the factory before leaving the factory and is charged with a certain amount of electricity. Users are advised to use it the day after installation to ensure the battery can charge and discharge more efficiently.

Instructions for using solar spotlights:

1. The solar lamp in the project is generally of a split structure. First, connect the male and female plugs of the electrical line of the light body and the photovoltaic solar panel, tighten the waterproof rubber cap, test if it works normally, then install and fix it.

2. Select the installation position and adjust the installation angle (the solar panel installation angle is oriented towards the south and try to install it in the position where the sun shines for a long period).

3. After installation, check if the screws and fixings of the lamp body are tight and if the lighting angle of the lamp body and the angle of sunlight from the photovoltaic panel are suitable.

4. Place the remote control transmitter in line with the lamp body, press the ON button on the remote control to turn the lamp on and press the OFF button to turn the lamp off. The remote control installation distance is 3 to 10 meters.

Don't worry if you notice the light getting dim! Under full charge conditions, the light can essentially stay on for 8 to 10 hours. Solar lights operate in a reduced power mode. If the brightness starts to decrease after three or four hours of illumination, this is not a problem with the light, but a normal operating mode for solar lights.

Current reduction time: approximately 12 hours
Time control function = output at 100% within the first 3 minutes
--- 10 minutes at preset brightness 90% / 10 minutes at preset brightness 80%
---1 hour 30 minutes at preset brightness 70% / 1 hour at preset brightness 60%
---1 hour of preset brightness 50%
---2 hours of preset brightness at 40%
---6 hours of preset brightness 30%
---After that, the brightness decreases by up to 20% until dawn.
Corresponding lighting time at full power: approximately 5 hours
Target application: occasions with sufficient battery power

Installation steps:

1. Select a suitable location for punching

2. Insert the screw into the hole

3. Secure the lamp body properly

4. Connect the connecting cable between the solar panel and the lamp