I. Product Presentation

This product is a magnetic suction cup car phone holder, suitable for the windshield or dashboard of most vehicle models. It features a strong suction cup for base attachment and a high magnetic adsorption module, ensuring stable phone placement with multi-angle adjustment. It facilitates navigation, calls, and other operations while driving (please observe traffic regulations and avoid frequent phone use while driving).
Product components: suction cup base, rotating arm, magnetic adsorption plate, angle adjustment knob, locking switch (for some models).
Applicable range: Suitable for mobile phones with screen sizes from 4.7 to 7.2 inches (including phones with cases; recommended case thickness ≤ 3 mm). Suitable for smooth glass, flat dashboards and similar surfaces.

II. Installation Steps 1. Preparation

Ensure that the installation surface (inside of the windshield or dashboard) is clean, dry, free of oil and protruding debris. If necessary, wipe it with a soft, clean cloth and allow it to dry.
If your phone case is non-metallic, attach the included magnetic sticker to the inside of the case (or directly to the back of the phone). Avoid covering the camera or wireless charging area, and press firmly for 10 seconds to ensure a tight adhesion.

2. Installation of the suction cup base

Remove the protective film from the suction cup base. Align the suction cup with the chosen position (glass or dashboard). Press firmly in the center of the suction cup, then pull the "locking switch" (if equipped) on the edge of the suction cup until you hear a "click" to confirm that it is locked.
After installation, gently pull on the base to test stability. If it slips, clean the surface again and repeat the steps above.

3. Adjusting the mounting angle

Loosen the angle adjustment knob on the arm. Rotate the arm or adsorption plate to adjust the phone's tilt angle to align with your line of sight (preferably at or slightly below eye level to avoid obstructing your driving view). Tighten the knob to lock the angle once adjusted.

III. Instructions for use

Phone placement: Bring the phone (with the magnetic sticker or built-in magnetic function) close to the magnetic plate. It will automatically align and attach via magnetic force. Gently push to ensure a secure fit.
Removing the phone: hold the edge of the phone and pull it outwards to detach it from the magnet.
Fine angle adjustment: Loosen the adjustment knob at any time to rotate the arm or plate to achieve the most comfortable viewing angle (e.g., landscape navigation, portrait calls).